The bathroom is often one of the most common places where mold can grow inside of a home, due to the specific environment of a bathroom. These rooms host rather high levels of humidity, which provides the superior environment in which mold can grow. Allowing mold to be present in your property can be incredibly detrimental to the health of everyone who lives in the house and breathes in the mold spores. Due to the impact mold can have on health, it is extremely important to prevent the growth of mold, as well as have it removed after it has accumulated. Not only should you take the steps to prevent mold, but you should also regularly inspect your property for the presence of mold. Here are a few tips for preventing the growth of mold in your bathroom and protecting the health of your family.
Areas to Check for Mold
You need to regularly check your bathroom for mold in order to ensure that it hasn’t developed. This will help you to detect mold in the early stages, which can prevent the damage to your health and the health of other residents inside of the building. Understanding the best areas to check for mold will help you to locate it early on. You need to check the caulking in the bathroom, especially around the tub and other areas with water. Check in and around the sink, as well as the toilet. Check the bathroom windows to locate the growth of mold, especially if the windows regularly experience condensation.
The ceilings and walls may allow moisture to cling to them, which often results in the growth of mold. This happens more often when you close the door while showering, because the moisture doesn’t have another exit point. Ensure that you wash towels, bathrobes, shower curtains, and shower mats regularly to prevent the growth of mold. You also need to check them regularly to identify when mold begins to grow.
Regular Causes of Mold
Understanding the causes of mold in a bathroom can go a long way toward helping you to prevent it from developing. This goes a long way toward protecting your room and preventing the development of mold. Bathrooms maintain a high level of humidity. Every time someone takes a shower in the bathroom, the humidity level increases. In addition, most bathrooms have relatively poor ventilation because the bathroom door is often closed during shower time. This leads to moisture sticking to the surfaces in the bathroom, rather than dissipating. The moisture accumulation allows mold to develop. In addition, caulking that begins to deteriorate can also make it easier for mold to develop within the bathroom. Familiarizing yourself with these causes can help you to take the steps to improve your bathroom and prevent the development of mold.
Implement Bathroom Fans
Most people don’t feel comfortable with showering with the bathroom door open, especially in shared households. However, shutting the bathroom door decreases the ability for steam and moisture to leave the room, which ultimately results in moisture accumulation and increased humidity inside of the room. You may want to consider showering with the window open in order to allow the moisture to get out of the room. However, this may not be an effective method in humid climates. In these situations, you may want to add a dehumidifier to the bathroom to reduce moisture levels.
You can also shower with the door open to improve the ventilation of the room. However, if none of these methods are available, you can have bathroom fans installed in your bathroom. Ensure that these fans are on when you shower to ensure that the moisture can be properly removed from the air inside of the room. Bathroom fans can substantially improve the ventilation of the room.
Ensure Plumbing is in Great Condition
It is critical to ensure that the plumbing of your building stays in good condition. Mold accumulation is one of the leading negative consequences of plumbing issues. It is important to ensure that the plumbing doesn’t leak. Have your plumbing regularly inspected by a professional to reduce the likelihood of leaks or other substantial concerns. In addition, regular plumbing maintenance is crucial in protecting the overall condition of your plumbing system. When you let plumbing maintenance fall to the wayside, it is far more likely that you will have leaks and you may even experience a burst pipe. These issues create an environment that allows mold to accumulate and cause further damage to the building. Contact our expert team to ensure that your plumbing system stays in good condition.
Mop Up Water
Allowing water to accumulate often leads to the development of mold. It is important to remove puddles and mop up water as quickly as possible after it has accumulated. This can help to prevent mold accumulation. In addition, it is important to have clogs fixed when they occur with your bathroom fixtures. A sink full of water, because it won’t drain, tends to allow mold to accumulate. It is incredibly important to have clogs removed quickly. Not only will this minimize the likelihood that mold will accumulate, but it will also ensure that your bathroom fixtures are still functional, which can improve the convenience of your home.
Here at S & B Plumbing, we offer a broad array of services in order to ensure that your plumbing systems continue to function effectively. This can go a long way toward preventing substantial issues from occurring and keeping your plumbing systems in superior condition. When there is an issue with your plumbing system, it is incredibly common for mold to develop, which simply compounds the damage to your building. Our plumbing services can both help to fix leaks, resolve clogs, and provide multiple other benefits. We also offer emergency services in the event that substantial issues arise. To learn more about our plumbing services and how they can protect the condition of your plumbing system, contact our experts at S & B Plumbing today!
